Unsanded Grout

Product Description

Unsanded Grout is a blend of Portland cement, chemical additives, and colour fast pigments. It is designed for wall & floor tiles with the joint of 1-3mm. Grout admix is especially made to enhance the efficiency and durability of unsanded grout. It is used in place of water to improve the Performance of grout. Unsanded Grouts are available in different shades.

Advantages

Non-Shrinking
Water resistant
Non-Dusting
Easy Application and Clean-up
Non-Yellowing
Easy Maintenance
Non-Spalling

Colors

Dark Blue( Saphire Blue)
Pink (Sunrise)
Dark Gray (Slate Gray)
Burgundy (Canyon Red)
Sky Blue (Diamond Blue)
Light Brown (Saltillo)
Almond
Peach ( Inca Gold )
Light Grey ( Smoke Greay )
Sage ( Sage )
Green ( Sea Green )
Beige ( Marble Beige )
Black ( Midnight Black )
White ( Bright White )
Ivory

Installation

1. Surface Preparation Before starting to grout remove spacers and debris in grout joint and remove dust and dirt using a wet sponge. Do not leave water standing in joints. Room temperature must be between 40 f (4 c) and 90f (32c) .

2. Mixing Use approximately 1 litre Grout Admix or water in (3 kg) of Unsanded grout. Place Grout Admix or water in a clean mixing container and add grout powder slowly. Mix by hand to a smooth stiff consistency. Allow to slake for 5-10 minutes and remix.

3. Application Dampen tile surface with water. Spread with a sharp, firm rubber grout float. Work the grout paste into joints until completely filled. Use diagonal stroke to pack the joints. Insure that joint is filled and grout is not just sitting on top(i.e. “bridging the joint” ).

4.Cleaning Grout Primary Cleaning –Remove excess grout from the face of the tiles with the edge of the grout float. Hold the float at a 90(c ) angle and pull it at a 45© angle diagonally across the joints and tile to avoid pulling out the material.

Grout Secondary Cleaning – Remove remaining grout with a damp sponge (not wet) or a damp towel. Work diagonally to the joints. Allow grout to become firm, before cleaning. Use water application to the minimum.