Product Description

Stile Fortified Bond is high performance Floor Thin Set Mortar used with water or Latex 73 for specially installing Marble, Porcelain and Granite Tiles .It is designed for application to lay larger sizes of tiles and formulated for high durability and strength . Use with Latex 73 for high performance interior and exterior application.

Advantages

• Specially made for porcelain and granite tiles and marble.
• It is formulated for High durability and strength.
• Time saving less seting time on porcelain.
• Water cleanable and easy to use.
• High tech –will fix tile with out slippage.

Mixing

Put 5litre water and 1litre latex73 thin set admix in 20 kg bag of Stile Fortified Bond. Liquid and dry bond should be thoroughly mixed and allowed to slakes 5-10 minutes, then remix before application. Adjust quantity of liquid to obtain creamy, smooth .wet and tacky consistency.

Recommended Surface

Use over clean, sound concrete. brick, block, and cement plaster, marble and ceramic tile. All surfaces should be structurally sound, clean and free of dirt, oil, grease, paint must be removed.

Coverage

Stile Porcellena Bond covers approx an area of 4- 6 m2 according to surface conditions.

Trowel Notches

Limitation

Do not apply to Plywood, Chipboard, Particle Board and decorative Laminates. Do not install tile/stone when surface temperature is below freezing.

Cautions

• Stile Bond may irritates eyes and skin. Avoid contact with eyes orprolonged contact with skin.
• In case of contact, flush the part thoroughly with water.
• Avoid breathing dust.
• Keep out of reach of children.

How to apply on Floor & Walls

• 1. Apply a layer of adhesive mortar on to the clean surface with the flat side of the trowel.

• 2. Use the notched side of the trowel and install another layer of the adhesive mortar at a 45(c)-60 (c) angle.

• 3. Porcelain tiles, mosaic tiles, marble. Butter the back of each piece before placing.

• 4. Place tiles while mortar is wet and tacky.

• 5. Use a beating block to bed the tiles firmly.

• 6. Align joints and clean surface of the tiles as work progresses.

back to top